The SCSSV is controlled by a ¼” stainless steel control line that is attached to the outside of the well tubing string and installed when the production tubing is installed. Depending on the wellhead pressure, it may be necessary to keep as much as 10,000 psi on the control line to keep the valve open.
PHC control panels feature the proven Haskel pump line that generates the required hydraulic
– 316 SS enclosure intragal hydraulic reservoir with level sight glass & vent fill cap
– Haskel air driven or manual pump with suction strainer, discharge check valve and air drive
– regulator
– High and low flowline pilots for automatic shutdown when abnormal line pressure is detected
– pull/push relay to open and close the scssv
– 15,000 psi gauge to monitor SCSSSV holding pressure
– 200 psi gauge to monitor esd pressure
– Flowline low pressure pilot bypass valve – hydraulic dump bypass valve
– ESD valve – relief valve for overpressure protection.
– 15 ci, 10,000 psi accumulator located under the panel
Specifications:
Pressure: for optimal valve control.
Sector: Refurbishment and Re-engineering
Country: Italy
Complete refurbishment and re-engineering of a high-pressure triplex pumping unit, with a total overhaul of the engine, pump, and transmission. New DNV 2.7-1 compliant skid, ATEX adaptation for classified zones, and CE-PED certification for offshore applications.
Sector: Geothermal
Country: Netherlands
Supply of Koomey Unit and Pressure Control Equipment, including large-sized Quick Test Subs and Crossovers (13 5/8″ and 12″), for workover and coiled tubing activities on a geothermal well in the Netherlands. The solutions were designed to allow the passage of workover assemblies and jet pumps with an OD up to 9″, ensuring operational continuity, safety, and documentation compliant with project requirements, supporting the development of geothermal energy as a renewable source.
Sector: Production Enhancement – Chemical Supply
Country: Kazakhstan
Joint development and supply of custom-made chemical formulations, in collaboration with the Client, for production enhancement and plant performance optimization applications. The program allowed an improvement in process efficiency and a significant reduction in operating costs.
Sector: Workover
Country: Turkmenistan
Supply of 15K PSI Well Control Equipment for a client operating in Turkmenistan. The equipment was prepared, tested, and certified in accordance with the operator’s technical requirements for use in a field characterized by complex operating conditions. The technical support provided during alignment and scope definition meetings was crucial for the correct configuration of the solutions.
Sector: Workover
Country: Turkey
Supply of Coflex Hose for a well testing project in Turkey. Technical specifications were defined in close coordination with the Client to ensure full compliance with the operator’s operational standards and QA/QC procedures. The added value of the intervention was direct field support, with operational verification and technical alignment during installation activities.
Send a request with activity, country, and timelines:
we will verify feasibility and required documentation.