The HAP two-stage pneumatic pump offers a low-pressure flow rate of 10 l/min with automatic switching to a high-pressure flow rate of 1.3 liters/min at 700 bar. Powered by a powerful 3 kW rotary air motor with a maximum air consumption of 2.4 m³ per minute at an inlet pressure of 7 bar, the HAP pump offers a choice of pump-mounted or remote-controlled valves and oil reservoirs, all equipped with fill and drain plugs.
A full range of system components is available for use with HAP pump units. Complete with hose reel.
Supplied as standard with a pressure gauge, FRL unit, and a robust protective frame.
2nd stage – 1,3
Specifications:
Working Pressure: 700 bar
Valve Type: 2-way
Oil Cap litres: 25
Maximum flow rate litres/min: 1st stage – 10
Weight: kg 63.0
Dimensions: in mm A 627 x B 352 x C 754
Sector: Refurbishment and Re-engineering
Country: Italy
Complete refurbishment and re-engineering of a high-pressure triplex pumping unit, with a total overhaul of the engine, pump, and transmission. New DNV 2.7-1 compliant skid, ATEX adaptation for classified zones, and CE-PED certification for offshore applications.
Sector: Geothermal
Country: Netherlands
Supply of Koomey Unit and Pressure Control Equipment, including large-sized Quick Test Subs and Crossovers (13 5/8″ and 12″), for workover and coiled tubing activities on a geothermal well in the Netherlands. The solutions were designed to allow the passage of workover assemblies and jet pumps with an OD up to 9″, ensuring operational continuity, safety, and documentation compliant with project requirements, supporting the development of geothermal energy as a renewable source.
Sector: Production Enhancement – Chemical Supply
Country: Kazakhstan
Joint development and supply of custom-made chemical formulations, in collaboration with the Client, for production enhancement and plant performance optimization applications. The program allowed an improvement in process efficiency and a significant reduction in operating costs.
Sector: Workover
Country: Turkmenistan
Supply of 15K PSI Well Control Equipment for a client operating in Turkmenistan. The equipment was prepared, tested, and certified in accordance with the operator’s technical requirements for use in a field characterized by complex operating conditions. The technical support provided during alignment and scope definition meetings was crucial for the correct configuration of the solutions.
Sector: Workover
Country: Turkey
Supply of Coflex Hose for a well testing project in Turkey. Technical specifications were defined in close coordination with the Client to ensure full compliance with the operator’s operational standards and QA/QC procedures. The added value of the intervention was direct field support, with operational verification and technical alignment during installation activities.
Send a request with activity, country, and timelines:
we will verify feasibility and required documentation.