The FT600 Filtration Unit is the most widely used filter cartridge unit for oilfield applications. The FT600 is fully certified by DNV for both lifting frame and vessels ensuring build quality throughout.
The design allows the operator to filter in series or parallel flow with the option to circulate if required. Vessels can be configured to hold the standard EN65 cartridges, EN160 cartridges or filter bags.
All vessels meet the demands of the PED (Pressure Equipment Directive) 2014/68/EU for Group 1 hazardous fluids, and are compliant with ATEX and H2S to NACE MR-01-75 standards. Optional Quick Closing Lids available.
Certifications:
Here below follows the main certification options:
– Pressure Equipment Directive 2014/68/EU (Formerly 97/23/EC), Group 1 Hazardous Fluids
– CE Marked & ATEX Compliant
– H2S to NACE MR-01-75 (≤ 60°C)
– ASME VIII Div.1 2010 Unit Specifications Vessel Design Standard ASME VIII Div.1 2010 Technical Specifications Gauges
Specifications:
Working Pressure: 7 Bar
Design Temperature: 100° C
Recommended Flow Rate: 172m3/hour
PSV’s (1 per Vessel): 7 Bar
Weight (Unit Only): 2,500 Kgs
Weight (Full of Water): 3,168 Kgs
Dimensions: (L x W x H) 2200mm x 1300mm x 2220mm
Lifting Frame Design: Standard DNV 2.7-1 with sling set
Number of Cartridges (per Vessel): 50x EN65 Cartridges
Vessel Diameter: 24” (610mm)
Vessel/Pipework Material: 316 Stainless Steel
Inlet / Outlet Pipework: 4” Series / Parallel / Bypass Manifold c/w Pressure
Inlet / Outlet Connections: 4” 150# Flange x 4” Weco Fig 206 Connections
Drain Connection: 1 ½” Pipework Flange Terminated
Drip Tray Volume: 0.13m3
Swing Bolt Torque Setting: 350 Nm (M20x 80 Swing Bolts)
Earth Boss: 2 at Diagonal Corners
Number of Butterfly Valves: 6
Type of Butterfly Valves: 4” Wafer Lever Operated Butterfly Valve – Cast Iron
Body: / Stainless Steel Disc / NBR Seal
Lid Seal Type: 8mm THK NBR Shore-70 O-Ring Cord
Gasket Type: 316 Stainless Steel Spiral Wound
Sector: Refurbishment and Re-engineering
Country: Italy
Complete refurbishment and re-engineering of a high-pressure triplex pumping unit, with a total overhaul of the engine, pump, and transmission. New DNV 2.7-1 compliant skid, ATEX adaptation for classified zones, and CE-PED certification for offshore applications.
Sector: Geothermal
Country: Netherlands
Supply of Koomey Unit and Pressure Control Equipment, including large-sized Quick Test Subs and Crossovers (13 5/8″ and 12″), for workover and coiled tubing activities on a geothermal well in the Netherlands. The solutions were designed to allow the passage of workover assemblies and jet pumps with an OD up to 9″, ensuring operational continuity, safety, and documentation compliant with project requirements, supporting the development of geothermal energy as a renewable source.
Sector: Production Enhancement – Chemical Supply
Country: Kazakhstan
Joint development and supply of custom-made chemical formulations, in collaboration with the Client, for production enhancement and plant performance optimization applications. The program allowed an improvement in process efficiency and a significant reduction in operating costs.
Sector: Workover
Country: Turkmenistan
Supply of 15K PSI Well Control Equipment for a client operating in Turkmenistan. The equipment was prepared, tested, and certified in accordance with the operator’s technical requirements for use in a field characterized by complex operating conditions. The technical support provided during alignment and scope definition meetings was crucial for the correct configuration of the solutions.
Sector: Workover
Country: Turkey
Supply of Coflex Hose for a well testing project in Turkey. Technical specifications were defined in close coordination with the Client to ensure full compliance with the operator’s operational standards and QA/QC procedures. The added value of the intervention was direct field support, with operational verification and technical alignment during installation activities.
Send a request with activity, country, and timelines:
we will verify feasibility and required documentation.