Mono & Di-Valent Salts

DES-CABR

Description

CaBr2 – Calcium Bromide. Available in both powder and liquid.

Applications

Used to form clear-brine workover and completion fluid with densities up to 1.70 S.G.
Workover & Completion Fluids

DES-CACL

Description

CaCl2 – Calcium Chloride powder is single salt used as soluble weighting agent and source of calcium

Applications

Used to form clear-brine workover and completion fluid with densities ranging from 8.4 to 11.8 lb/ gal. Inhibits hydration and migration of swelling clays. Used in invert emulsion mud to adjust the activity of the water phase.
Non-AqueousWorkover & Completion Fluids

DES-K-FORMATE

Description

Potassium Formate. Available in both powder and liquid.

Applications

Used to form clear-brine workover and completion fluid. The maximum density of saturated Sodium Formate (HCOONa) liquids (aqueous solutions) is approximately 1.57–1.58 g/cm³.
Workover & Completion Fluids

DES-KCL

Description

KCl – Potassium Chloride

Applications

Used to form clear-brine workover and completion fluid with densities ranging from 8.4 to 9.7 lb/ gal. Inhibits hydration and migration of swelling clays.
Workover & Completion Fluids

DES-MGCL

Description

MgCl2 – Magnesium Chloride for weight up and Salt Saturated System

Applications

Magnesium chloride is used in drilling fluids, specialized water-based systems to inhibit shale swelling and control hydration. It acts as a highly soluble, environmentally acceptable, and cost-effective alternative to potassium chloride. Often used in applications to drill through complex salt formations with interbedded clay/shale sensitive formations.
Water-Based

DES-N-FORMATE

Description

Sodium Formate. Available in both powder and liquid.

Applications

Used to form clear-brine workover and completion fluid. The maximum density of saturated Sodium Formate (HCOONa) liquids (aqueous solutions) is approximately 1.30–1.33 g/cm³.
Workover & Completion Fluids

DES-NABR

Description

NaBr – Sodium Bromide. Available in both powder and liquid.

Applications

Used to form clear-brine workover and completion fluid with densities up to 1.48 S.G.
Workover & Completion Fluids

DES-NACL

Description

NaCl – Sodium Chloride

Applications

Used to form clear-brine workover and completion fluid with densities ranging from 8.4 to 10 lb/ gal. Increase shale inhibition by decreasing water activity, reducing formation salt dissolution, reducing freezing point of water base fluids and reducing the potential of forming gas hydrates.
Water-BasedWorkover & Completion Fluids

DES-ZNBR

Description

ZnBr2 – Zinc Bromide. Available in both powder and liquid.

Applications

Used to form clear-brine workover and completion fluid with densities up to 2.30 S.G.
Workover & Completion Fluids

Featured projects

Selected activities representing our
cross-market operational support.

Stimulation Triplex Pump

Sector: Refurbishment and Re-engineering
Country: Italy

Complete refurbishment and re-engineering of a high-pressure triplex pumping unit, with a total overhaul of the engine, pump, and transmission. New DNV 2.7-1 compliant skid, ATEX adaptation for classified zones, and CE-PED certification for offshore applications.

VIEW PROJECT DETAILS

Koomey Unit and Pressure Control for geothermal project

Sector: Geothermal
Country: Netherlands

Supply of Koomey Unit and Pressure Control Equipment, including large-sized Quick Test Subs and Crossovers (13 5/8″ and 12″), for workover and coiled tubing activities on a geothermal well in the Netherlands. The solutions were designed to allow the passage of workover assemblies and jet pumps with an OD up to 9″, ensuring operational continuity, safety, and documentation compliant with project requirements, supporting the development of geothermal energy as a renewable source.

Custom chemical formulations for Production Enhancement

Sector: Production Enhancement – Chemical Supply
Country: Kazakhstan

Joint development and supply of custom-made chemical formulations, in collaboration with the Client, for production enhancement and plant performance optimization applications. The program allowed an improvement in process efficiency and a significant reduction in operating costs.

Supply of 15K PSI Well Control Equipment

Sector: Workover
Country: Turkmenistan

Supply of 15K PSI Well Control Equipment for a client operating in Turkmenistan. The equipment was prepared, tested, and certified in accordance with the operator’s technical requirements for use in a field characterized by complex operating conditions. The technical support provided during alignment and scope definition meetings was crucial for the correct configuration of the solutions.

Coflex Hose for Well Testing activities

Sector: Workover
Country: Turkey

Supply of Coflex Hose for a well testing project in Turkey. Technical specifications were defined in close coordination with the Client to ensure full compliance with the operator’s operational standards and QA/QC procedures. The added value of the intervention was direct field support, with operational verification and technical alignment during installation activities.

VIEW ALL PROJECTS

Do you want similar support?

Send a request with activity, country, and timelines:
we will verify feasibility and required documentation.

CONTACTS